Product Portfolio
Daelim Royal EnP offers a comprehensive range of industrial boilers and related systems, including:
- Home
- Product Portfolio
Low Nox Inverter Condensing Boiler:
Innovation of Boiler! Condensing Boiler fits with environment and shows supreme thermo-efficiency of 101.5%
Main Features:
- Boiler efficiency 101.5%(based on the net calorific value) achieved.
- O2 trimming (patented in 2009) device.
- Active handling of sudden load changes by applying a high-efficiency inverter. (ultra power saving, 40~50% reduction in CO2 and NOx)
- Equipped with a strong heat pipe type air preheater(heat efficiency maximized)
- Equipped with an energy saving condensing economizer(CO2 reduction)
- Minimizing pollution(condensate water released after being neutralized)
- Safe design with logical research facility structure.
- Able to recover exhaust heat up to 40 to 50%.
- Able to respond to sufficient output for retained water, as well as load changes.
- Easy maintenance of major parts.
Main Features:
- The rear combustion chamber of wet type has no loss of heat. Its smoke tube is designed as spiral type to comply with thermal expansion, which features high safety and high heat absorption rate. High heat absorption rate per unit area approves it to be a very efficient boiler.
- With less water and lower preheating load than existing boilers, it cuts down the fuel expenses and easily copes with load changes.
- The ideal arrangement of smoke tube makes water smoothly circulate. The special waterproof plate increases the dryness degree of steam and prevents a lowering of production efficiency that may result from wet steam or the corrosion of water hammer pipe.
- Minimized ventilation loss, leading to inexpensive maintenance cost and very low boiler noise.
- Simple structure convenient for check and maintenance, simple installation leading to short installation period and inexpensive installation cost, and good-looking experience.
- Minimized heat loss resulting in maximized heat efficiency and low steam production cost.
Fire Tube Steam Boiler:
It is an innovative boiler using heat transfer fluid to raise high temperature safety with a low pressure in a factory requiring high pressure; it can control temperature precisely with a fully automated system; it can save equipment cost as well as maintenance by achieving maximized productivity from high efficiency, minimizing fuel cast, high safety and semi-permanent life.
Hot oil Boiler
It is an innovative boiler using heat transfer fluid to raise high temperature safely with a low pressure in a factory requiring high pressure; it can control temperature precisely with a fully automated system; it can save equipment cost as well as maintenance cost by achieving maximized productivity from high efficiency, minimizing fuel cost, high safety and semi-permanent life.
Main Features:
- High temperature of Max. 350 from low pressure is safely obtained.
- It is a special structure to keep high heat efficiency and simply controls boiling and cooling.
- There is no loss of heat, and water feeding and supply system are not needed, because hot oil is circulated within an airtight cycle.
- It is made very precisely with the processing machine of an exclusive hot oil boiler coil.
- Heating coil is evenly disposed on heating surface, so that boiling phenomena may not be occurred in a partial section. Besides, life time is semipermanent with no carbonization and erosion of heat oil.
- As the front part can be opened and closed, cleaning is available anytime. So, it keeps heat efficiency and prolongs its life time. It requires small installation area and has simple structure and nice appearance.
※ Usage : Textile, Dyeing, Food processing, Synthetic resin, Petroleum & Chemistry, Paint & Vamish, Oil & Fat industry and factory etc.
Waste Heat Recovery Boiler:
Using waste heat generated in the waste incineration, it needs no extra fuel cost. As the smoke tube boiler, it is easy to clean and repair by good design and excellent arrangement of tube. Having 4 cornered arrangements and cleaning space, it is a clean matter to water tube typed 3drum waste heat recovery boiler.
Water Tube Boiler:
It is an innovative boiler using heat transfer fluid to raise high temperature safely with a low pressure in a factory requiring high pressure; it can control temperature precisely with a fully automated system; it can save equipment cost as well as maintenance cost by achieving maximized productivity from high efficiency, minimizing fuel cost, high safety and semi-permanent life.
- Water tube steam boiler with membrane wall system is designed to keep the wall under saturated steam temperature by minimizing radiant heat loss and to maximize the efficiency of heat by a pressed combustion system.
- It has high durability with the perfect design and high quality materials.
- This design was made in accordance with the calculation of minimum maintenance temperature of heating surface. It solves the problem of short life time of air preheater caused by the erosion of low temperature. In result, the durable time was prolonged. As it has membrane wall system, there is no gas leaking. It is easy not only to repair
- with no establishment of castable but also to clean and remove soot.
- Special steam separator was used to minimize foaming and priming. This prevented low productivity resulted from the erosion of water hammer pipe and wet steam. With the proper arrangement of vaporization pipe, downcast pipe and banks of tubes,
- waterish smoothly circulated and it is very safe because of no shake of the water inside boiler pipes.
- It is also designed to lower the loss of ventilation, which made it possible to reduce the maintenance cost and the operation noise.
※ Usage : Synthetic fiber, Paper manufacturing, Beer alcool factories, Food process- ing factories, Rubber factories, Apartments and factories to need medium or large volume of steam with high pressure such as petroleum chemistry plant.
Vertical Smoke Tube Boiler:
A vertical fire-tube boiler is a vertical boiler where the heating surface is composed of multiple small fire-tubes, arranged vertically. Circulation became efficient and made easy be attachment of getaway tube. Gas, Gasoline
Gasoline and Diesel oil can all be used depending on selection of burners.
High-Efficiency Multi Tube Boiler:
Equipped with high-performance burners. Minimized noise from blowers and combustors. Beautiful look best-fitted to any installation place.
Main Feature:
- Steam is generated in 10 minutes without preheating and good quality steam with high quality rate and high calorie is constantly provided even in rapid load change.
- Simple and easy operation by almost anybody with its attached control panel to make alarm the troubled part in any error takes place.
- Equipped with various safety devices such as gas pressure switch, flame detecting device, low water level detector, pipe body thermometer, safety relief valve, pressure switch. etc.
- Available in a small space and its beautiful design and color is matched in any place.
Boiler Spare Parts
1.Low-Nox Burner
- Daelim royal EnP striving to “Perfect Combustion”. We consider “environment” as our Priority. We designed and manufactured to operate gas burner and oil burner of the blast typed boiler easily.
Main Features:
- Safe Operation by nozzle mix type combusyion Inflow of fuel and air is made from a separate pipe. Backfire is prevented by mixing at the burner outlet.
- Easy adjustment of wind capacity and wind pressure wind capacity is easily adjusted by the special device of the number.
- Simple System & Easy operation Easy operation and teoubleshooting.
- Optimum capacity and compatability The compatability of blast type burner and our boiler system produces the maximum capacity.
- Free operation Automatic control panel mounted to operate Automatically.
- Optimum control mode by boiler capacity ON-OFF, HIGH-LOW-OFF, Proportional Control mode is used by maintaining air supply pressure and wind capacity constantly.
- Fuel is optional Mainly vaporized LNG or LPG is used. Special production is possible for using as oil gas also.
